Heart in Studs
Standard
They are produced from the centre part or the 'heart' area of pine logs. Heart-in framing studs are visually graded in accordance to AS2858. Definiton of Heart in studs is generally lower density material containing growth rings of radius of less than 50mm.

Why Heart in Studs?
'The heart part of the log is usaully characterised by wide growth rings, low density wood fibre and is most prone to twist and movement because of these and other physical attributes. In recognition of these factors and the need to produce a fit the purpose product , the pine processing industry introduced Heart-In studs as a cost effective product. This product as such has limitations on visual characteristics such as knots as well as utility requirements such as spring, bow and twist

Storing

Timber is a natural and environmentally friendly material and is produced form plantations and sustainably managed forests that are critical to the health of our planet. To get the best out of timber, it's worth taking a little care.

• Timber should remain strapped and stored under cover where possible, stacked straight and off the ground.
• When delivered, good building practice dictates that it should be carefully lifted from the truck and stacked straight and dry. Keeping the pack covered and strapped will assist in reducing moisture changes and reduce heat differential within the pack - the strapping will help reduce distortion.

Sizes Available

Heart in studs come in the following sizes in 2.4m & 2.7 lengths

• 70mmx45mm
• 90mmx35mm
• 90mmx45mm