| AquaTec
wet area flooring is an easy-to-install structural
sheet flooring product specially developed for
internal wet areas such as bathrooms and laundries. |
|
 |
New patented technology gives
AquaTec wet area flooring all the benefits of
fibre cement flooring with the added advantages
of being lighter in weight, durable and easy to
nail. The tongue and groove sheets also minimise
the need for timber blocking under joins. |
| Innovative material
design makes AquaTec wet area flooring durable
and easy to work with.
- Nail by hand or gun without pre-drilling
- Resistant to moisture damage, shrinking,
swelling and cracking.
- Easy tongue and groove system with recess
for joint sealant.
- Around 20 percent lighter and easier to
cut than 15mm compressed fibre cement.
- Suitable where non-combustible materials
are required in accordance with the building
code of Australia.
|
|
| |
Product information
- Sheet size 1800x900x19mm
- Sheet weight approximately 36.5kg
- Sheets are factory sealed
- Suitable for maximum 450mm joist centres
- Suitable for internal use only
|
| Sheet joins require
adequate waterproofing with a suitable sealant
as per the instructions.
CSIRO Technical Assessment 318
states AquaTec wet area flooring is an equal alternative
to compressed fibre cement for use as a structural
flooring product in wet areas. This means that
full floor waterproofing is not required outside
of the enclosed shower area. |
|
